DMX help with lighting fixtures (no control)

Hi, I was provided a code for my lighting system by a member of this forum. It worked, for one light. Then when trying to do it again, the lights would automatically turn red with no input on my end. I have 6 fixtures with 7 channels each, I have checked the DMX addresses for overlapping, looked in the software for changes, and even read the manual. I don't have any control over the red and I no longer can control the first fixture, any suggestions? Thanks so much; I can provide more information upon request.

Here you go, tTest Project.zipTest Project.zipTest Project.ziphank you so much! I really appreciate it!
Each light has 7 channels, brightness, red, green, blue, strobe, color fade, speed.
I also have provided the code bellow.

<?xml version="1.0" encoding="UTF-8"?>
<device image="IMG.png" type="DMXDevice" dmxaddresscount="7" DefaultDisplayStyle="PREVIEW" dmxcversion="3.1.0" ddfversion="1.0.0">
  <information>
    <model>Par Lights 36 LED</model>
    <vendor>LUNSY</vendor>
    <author>Helmut</author>
    <mode>7 Channel</mode>
  </information>
  <functions>
    <dimmer dmxchannel="0"/>
    <strobe dmxchannel="4">
      <range type="linear" mindmx="0" maxdmx="255" minval="0" maxval="10"/>
    </strobe>
    <rawstep dmxchannel="5" name="Mode">
      <step caption="Off" mindmx="0" maxdmx="50"/>
      <step caption="Color Step" mindmx="51" maxdmx="100"/>
      <step caption="Color Fade" mindmx="101" maxdmx="150"/>
      <step caption="Color Fade In/Out" mindmx="151" maxdmx="200"/>
      <step caption="Music Mode" mindmx="200" maxdmx="255"/>
    </rawstep>
    <raw dmxchannel="6" name="Mode Speed">
      <range type="linear" mindmx="0" maxdmx="255" minval="0" maxval="100"/>
    </raw>
    <rgb>
      <red dmxchannel="1"/>
      <green dmxchannel="2"/>
      <blue dmxchannel="3"/>
    </rgb>
  </functions>
</device>

Hey, I'm still having the same issue, not sure if anyone has looked at the file but if so, that would be great!

I made sure all of the channels marched up with the program. When using my DMX board that I have, I can control all of the lights fine with no issue.

I wonder if it has to do with the code I was provided? I wouldn't know why it suddenly stopped working and doesn't work on any other light though.

I will keep trying though, thanks for the tip.