Running a Cuelist using a DMX in

We proudly present: The release of DMXControl 3.3.3!


On September 29, 2026, we held our release show for DMXControl 3.3.3. During our usual “hour-long” session, we showed you all the new features in this version and what it now has to offer.
Read all about it in the corresponding news article: We proudly present: The release of DMXControl 3.3.3!


  • I'm using a DMX input to trigger a simple cuelist to turn some RGBW lights to turn on (full white). The cuelist works, the lights turn on but they immediately start fading to black and turning off. I have to manually turn the dimmer on all of them to 100% before the cuelist works correctly. In the cuelist, I've made sure that the dimmer is set to 100% in the cue. There is only a single cue and nothing else.

    Any thoughts on this?

  • Hi,

    and in addition to that, can you please add another screenshot of the configuration of this cuelist. Both is important, because there are multiple possibilities, why the cuelist show this behavior.

    JP

    im Falle eines Falles klebt Gaffa einfach alles, denn Gaffa ist dein Freund und Helfer :thumbup:

  • Hello guys,

    Thank you for your reply and sorry for the late reply, I just saw the updates in the threads.

    I've attached the project and a screenshot of the configuration of a typical cuelist (all are pretty much identical to this). The connectionset doesn't fit properly in an image since its multiple connections. The setup is designed with the following operation in mind:

    - There are two PCs, PC1 manages DMX triggers that go into PC2 and PC2 runs DMXC3

    - PC1 starts a show which runs for say 10 minutes; it triggers one or more cuelists in PC2 at the start of a show and it send DMX triggers to reset them at the end of a show

    - DMX input 4 resets all the cuelists (for example at the start of the day or at the end of a show)

    - DMX input 1 turns all lights off (only used at the end of the day)

    I'm not sure if the cuelist configuration is correct, any help or advice would be much appreciated.

    Cheers!

  • Newly created posts will remain inaccessible for others until approved by a moderator. The last reply was more than 365 days ago, this thread is most likely obsolete. It is recommended to create a new thread instead.