kannst du die Bilder mal ordentlich im Forum hochladen? Ich kann darauf nichts erkennen.
Am besten die Codezeilen hier rein kopieren.
LightMaxx Vega Dot 60 Watt.
-
Helmut -
March 12, 2020 at 1:56 AM -
Thread is Resolved
We proudly present: The release of DMXControl 3.3.3!
On September 29, 2026, we held our release show for DMXControl 3.3.3. During our usual “hour-long” session, we showed you all the new features in this version and what it now has to offer.
Read all about it in the corresponding news article: We proudly present: The release of DMXControl 3.3.3!
-
-
XML
Display More<?xml version="1.0" encoding="utf-8"?> <device image="vega 60.png" type="DMXDevice" dmxaddresscount="16" dmxcversion="3.1.0" ddfversion="1.0"> <information> <model>Vega Dot 60</model> <vendor>LightmaXX</vendor> <author>Helmut</author> <comment>User Wunsch</comment> <mode>16 Channel</mode> </information> <functions> <position> <pan dmxchannel="0"> <range range="360" /> </pan> <tilt dmxchannel="3"> <range range="270" /> </tilt> </position> <rotation dmxchannel="1"> <step type="stop" mindmx="0" maxdmx="7" /> <range type="cw" mindmx="8" maxdmx="127" minval="0.05" maxval="5" /> <range type="ccw" mindmx="255" maxdmx="128" minval="0.05" maxval="5" /> </rotation> <raw dmxchannel="2" name="X speed"> <range type="linear" mindmx="255" maxdmx="0" minval="0" maxval="100" /> </raw> <raw dmxchannel="4" name="Rotation Back and Forth"> <range type="linear" mindmx="0" maxdmx="255" minval="0" maxval="100" /> </raw> <raw dmxchannel="5" name="Y speed"> <range type="linear" mindmx="255" maxdmx="0" minval="0" maxval="100" /> </raw> <dimmer dmxchannel="6" /> <shutter dmxchannel="7"> <step type="closed" mindmx="0" maxdmx="4" /> <step type="open" mindmx="251" maxdmx="255" /> </shutter> <strobe dmxchannel="7"> <step type="open" mindmx="251" maxdmx="255" /> <range type="linear" mindmx="5" maxdmx="250" minval="1" maxval="12" /> </strobe> <rgb> <red dmxchannel="8" /> <green dmxchannel="9" /> <blue dmxchannel="10" /> </rgb> <rawstep dmxchannel="12" name="Macro Color"> <step caption="Aus" mindmx="0" maxdmx="7" /> <step caption="Red" mindmx="8" maxdmx="17" /> <step caption="Green" mindmx="18" maxdmx="27" /> <step caption="Blue" mindmx="28" maxdmx="37" /> <step caption="White" mindmx="38" maxdmx="47" /> <step caption="R+G" mindmx="48" maxdmx="57" /> <step caption="G+B" mindmx="58" maxdmx="67" /> <step caption="B+W" mindmx="68" maxdmx="77" /> <step caption="R+W" mindmx="78" maxdmx="87" /> <step caption="R+G+B" mindmx="88" maxdmx="97" /> <step caption="G+B+W" mindmx="98" maxdmx="107" /> <step caption="R+B+W" mindmx="108" maxdmx="117" /> <step caption="R+G+W" mindmx="118" maxdmx="127" /> <step caption="R+G+B+W" mindmx="128" maxdmx="137" /> </rawstep> <raw dmxchannel="13" name="LED Auto Play Speed"> <range type="linear" mindmx="0" maxdmx="255" minval="0" maxval="100" /> </raw> <rawstep dmxchannel="14" name="X-Y Auto Show"> <step caption="Aus" mindmx="0" maxdmx="7" /> <step caption="Auto Run 1" mindmx="8" maxdmx="32" /> <step caption="Auto Run 2" mindmx="33" maxdmx="58" /> <step caption="Auto Run 3" mindmx="59" maxdmx="84" /> <step caption="Auto Run 4" mindmx="85" maxdmx="110" /> <step caption="Auto Run 5" mindmx="111" maxdmx="136" /> <step caption="Auto Run 6" mindmx="137" maxdmx="162" /> <step caption="Auto Run 7" mindmx="163" maxdmx="188" /> <step caption="Auto Run 8" mindmx="189" maxdmx="214" /> <step caption="Auto Run 9" mindmx="215" maxdmx="240" /> <step caption="Sound Control" mindmx="241" maxdmx="255" /> </rawstep> <ptspeed /> </functions> <procedures> <reset> <set dmxchannel="15" value="253" /> <hold value="10000" /> <restore dmxchannel="15" /> </reset> <procedure name="Speed Mode High"> <set dmxchannel="15" value="60" /> <hold value="10000" /> <restore dmxchannel="15" /> </procedure> <procedure name="Speed Mode Low"> <set dmxchannel="15" value="160" /> <hold value="10000" /> <restore dmxchannel="15" /> </procedure> </procedures> </device> -
sorry bin mit den Bildern noch nicht so fit
-
Zumindest passiert bwi mir in der DMX Ausgabe was. Ich habe leider nicht das passende Gerät hier am Start. Hast du es mal probiert?
-
Bei mir ging bis gestern halt die Schutter Farben, Dimmer.. Alles bis auf Bewegen.
Hast du nun was geändert?
-
nö
Hast du mal X und Y Speed verändert, ob sich das Gerät dann dreht? -
Ich teste es heute abend nochmal
-
Du meinst in der ddf ändern oder in dmxc3?
-
in DMXC im Device Control
-
Okay, Ich versuche es
-
Hallo,
die Geschwindigkeit der y und x Achse war auch 0 gestellt. nun kann ich ihn bewegen.
Vielen Vielen Dank Euch allen.
Ich hoffe ich kann auch mal helfen

-
-
Newly created posts will remain inaccessible for others until approved by a moderator. The last reply was more than 365 days ago, this thread is most likely obsolete. It is recommended to create a new thread instead.