We proudly present: The release of DMXControl 3.3.3!

Even before the release of DMXControl 3.3.2 in June, our development team was already hard at work on new features for the next version, which is now available to you. DMXControl 3.3.3 is once again packed with numerous highlights:

• Almost all of the existing windows for controlling device functions have been completely redesigned (with the exception of Matrix, Radix, and Device Control).
• With the Strobe and Prism panel, two completely new windows have been added. They now allow for quick and easy operation of these device functions.
• The new Fanning Manager now allows you to easily set and adjust fannings directly in the control windows mentioned above.
• Thanks to a donation from MWSysTech, several new nodes have been added to the Input Assignment. Among other things, there is now a time node, a moving average node, a deadzone node (e.g., for the center point of controllers), and a limiter node.
• Many small detail improvements have optimized existing nodes in the Input Assignment, some with new outputs or new options.
• The layout of the Master window and the Executor window has been optimized to allow more elements to be displayed at the same time.
• Code cleanup is also part of this: Work continued on systematically cleaning up the DMXControl 3 code to ensure its long-term maintainability.

In addition to the highlights, this version also includes several bug fixes and minor optimizations:

• FS#4325 : Gemeinsame Ansteuerung von Intensity, Fade Factor und Speed Factor von mehreren Cuelists
• FS#4405 : Slider mit Maus Scrollrad bedienen geht nicht.
• FS#4754 : Erweiterung der Executor/Dynamic Executer Nodes
• FS#4975 : Project Administration: Rückfrage "Projekt laden" bei aktiven Cuelists
• FS#5122 : Math Node: Neuer Operator "Average"
• FS#5340 : DMXC Mixer Node: Status des (Gernic) Switch aufnehmen
• FS#5361 : Im Node für Proceduren die Möglichkeit schaffen eigene Proceduren zu verwenden.
• FS#5425 : Eingangszuweisungen: Executor Page Selected Ausgang funktioniert nicht
• FS#5466 : Cuelist Group Executor müsste (eigentlich) auch Werte >1 für Fade und Speed Factor zulassen
• FS#5470 : Special Cues: Wert für Faderwert eines Macros wird nicht übernommen
• FS#5527 : Bei Wechsel zwischen Projekten in der Projekt Administration gehen Änderungen verloren
• FS#5565 : NPE in den Mastern, wenn man kein Projekt geladen hat
• FS#5572 : Am Timecode-Node auch die verbleibende Zeit zur Verfügung stellen
• FS#5590 : FFT-Diagramm in den Timecode Shows werden nicht mehr richtig dargestellt / aktualisiert
• FS#5592 : Dateien aus Unterordner "Symbols" des Installationsverzeichnis der GUI entfernen
• FS#5607 : Fanning-Manager: Display-Name für Master anzeigen
• FS#5608 : DMXC 3.3.2 Art-Net Interface Daten an mehrere Art-Net-Nodes gleichzeitig funktioniert nicht
• FS#5623 : Layoutoptimierung an Control Panel
• FS#5624 : Nicht aktive Fader in Control Panel "richtig" ausgrauen
• FS#5625 : Buttons für Modus im Strobe bzw. Prisma im Prism-Panel echt ausblenden

The download links

DMXControl 3

• DMXControl 3.3.3: https://dmxcontrol.de/en/downloads/2…trol-3-3-3.html

.net frameworks

All four packages must be installed on your PC! However, the installer usually takes care of this, so you only need to take action here if there is a problem and the installer is unable to download the data.

• .NET 8 Desktop Runtime (32bit): https://aka.ms/dotnet/8.0/windowsdesktop-runtime-win-x86.exe
• .NET 8 Desktop Runtime (64bit): https://aka.ms/dotnet/8.0/windowsdesktop-runtime-win-x64.exe
• ASP.NET Core 8 (32bit): https://aka.ms/dotnet/8.0/aspnetcore-runtime-win-x86.exe
• ASP.NET Core 8 (64bit): https://aka.ms/dotnet/8.0/aspnetcore-runtime-win-x64.exe

We hope you enjoy this new version!

Your DMXControl team