DMX Newbie Needs Major Assistance!

We proudly present: The release of DMXControl 3.3.3!


On September 29, 2026, we held our release show for DMXControl 3.3.3. During our usual “hour-long” session, we showed you all the new features in this version and what it now has to offer.
Read all about it in the corresponding news article: We proudly present: The release of DMXControl 3.3.3!


  • Hi,
    My mate Toddy runs a mobile disco and all his lights are DMX. Being his PC bloke he's asked me to find out about DMX controllers and I have no idea where to start. I was hoping someone here could help on which USB-DMX kit to buy from ebay and how the hell we get all his lights talking to it and make a decent light show instead of depending on the sound/light built in controllers.

    Cheers,

    Tref

  • Hi,
    there are many interfaces, supported by DMXControl. A list of all interfaces could be found here. But I would recommend you to build a Digital Enlightenment-Interface (known as the DE-Interface) or to buy the commercial version called fx5-Interface. Many people on this forum have this USB-DMX-interface (me too ;)) and they are realy happy with it. Reasons: 1. very stable 2. have an DMX-In to control DMXC with an external DMX-Controller and 3. calculate the DMX-output on its own (other interfaces use the CPU) 4. one of the best-price interfaces. If one of you two is good in soldering (and understand a little bit german :D) you can build the interface by using the project-files which could be found here (german page) (link on the bottom of the page after "Selber aufbauen"). To build the interface it will costs you about 60-70€ in total. The fx5-Interface costs 150€ (link on the same page but after "Fertig kaufen").

    If you want an other interface than the DE-Interface, you can try one of the DMX4all-Interfaces. But I couldn't tell you anything about those Interfaces, because I have only the DE-Interface. Whether or not, you shouldn't buy a very cheap interface. As I said before, those interfaces use the CPU to calculate the DMX-output and have a high latency.

    But before you buy an interface you should try, if you like DMXControl. It is for free, and work (exept the DMX-output) without an Interface connected. To see, what DMXC does, when you play around, you can link DMXC with 3D Easy View, a 3D visualisation programm (a demoversion (totaly sufficient) could be downloaded on the homepage of sunlite (here)). An other free DMX-program is freestyler.

    Best regards
    JP

    P.S.: Sry for my bad english :).

    im Falle eines Falles klebt Gaffa einfach alles, denn Gaffa ist dein Freund und Helfer :thumbup:

    Edited once, last by JPK (April 3, 2012 at 12:17 AM).

  • Your English is much better than my German! Thanks for the advice, much appreciated. I will be doing the USB as I like your advice and think that will be best. Great stuff!

  • Newly created posts will remain inaccessible for others until approved by a moderator. The last reply was more than 365 days ago, this thread is most likely obsolete. It is recommended to create a new thread instead.