beginners questions

We proudly present: The release of DMXControl 3.3.3!


On September 29, 2026, we held our release show for DMXControl 3.3.3. During our usual “hour-long” session, we showed you all the new features in this version and what it now has to offer.
Read all about it in the corresponding news article: We proudly present: The release of DMXControl 3.3.3!


  • hey everyone-

    i stumbled upon this site after doing a google search for "controlling lights via midi" or some such. i must say im extremely impressed with the depth of this freeware program.

    im trying to find a simple way to operate 4 to 8 par lights on stage with my band. nothing super fancy, i just want the ability to turn the lights on and off independently and switch between various sets of them. i figured the easiest way would be to control them via my midi controller, which is an m-audio trigger finger. ive spent a few days researching this and still feel like a total newbie. finding dmxcontrol seems to be the answer to my problem, but i guess i still need some guidance when it comes to general dmx use. would i be able to run my midi controller into my pc which is running dmxcontrol and out into a dimmer of some kind, which in turn the lights are plugged into...? do i have that sequence correct or am i missing something? is it really that simple?

  • yes, you're pretty right.

    you need to plug in your midi control on your soundcard (joystick-in) an you need to plug in an dmx-out onto usb or pci.

    the dmx wire from your pc goes on two dimmpacks (maybe botex DDP-405).

    thats it

  • Hi, I don't know a word of German (I'm guessing that the language) and just downloaded the DMXControl software.

    I have an RS232 to RS485 box and want to use my computer to control a LED fixture that uses 6 DMX channels.

    Can I do this with DMXControl? If I can is there a tutorial or can someone give me a start?

  • Hi edwardx!

    German is the right answer of your guess. ;)
    What type (manufacturer) of interface do you have? DMXC needs special output-plugins to control the different devices. If one exists it is no problem and we can instruct you to get it to work.
    What LED Fixture do you have?

    Hoc

    Mein Equipment:
    1x Hirn | 2x Augen (leicht defekt) |2x Ohren | 1x Mund |32x Zahn (zum Teil V1.5) | 1x Handundfuß-Interface
    *SCNR*

  • Hi Hoc,

    The LED light I designed. I programmed the microcontroller to receive the first 6 channels of DMX and do various effects depending on the level.

    I have a console to test with and the console outputs 512 channels of DMX.

    I don't know how to write windows based software and wanted a quick solution that would allow me to transmit DMX through my com port.

    I have a box that converts RS232 from the com port to RS485, so that takes care of the physical requirements for DMX.

    Does DMXC make the DMX packets and can I stream them to my com port?

    Ed

  • Hi!

    Okey, so you designed both devices youself?
    The problem is your comport interface. DMXC generates all the stuff needed for an interface to output the DMX-Signal, but you need a .dll for each interface you have. If it is built like the enttec (openDMX)- Interface then you need the "Afterglow"-Plugin. If it is an interface from a manufacturer like dmx4all then you need the special output-.dll for that one.
    If we don't know the protokoll your Interface "understands", then DMXC cannot create a connection to it. So you eather have to find a plugin that fits or you have to write one yourself.
    Unfortunately I cannot help you with that because I never done this before.

    Hoc

    Mein Equipment:
    1x Hirn | 2x Augen (leicht defekt) |2x Ohren | 1x Mund |32x Zahn (zum Teil V1.5) | 1x Handundfuß-Interface
    *SCNR*

  • hi
    is it right, that it's only necessary to send the dmx values via RS232 to control your hardware?
    That's no problem, if you can send me your protocol, I can program a suitable plug-in for your LEDs

    markus

  • Hi,

    Basically I want to stream dmx512 through the com port of my computer. I have a rs232 to rs485 adapter, so the physical part is done.

    I'm sure this can be done with VB, however I thought DMXControl would be able to talk to the COM port, sending the DMX packets. Can it do this? If yes then this would be a perfect.

    Markus do you have a .dll that will allow DMXConrol to do this for me?

    Thanks for the input!

    Ed

  • Newly created posts will remain inaccessible for others until approved by a moderator. The last reply was more than 365 days ago, this thread is most likely obsolete. It is recommended to create a new thread instead.