Devices (Not Responding) Error / After program Loads & first button Used the program takes 1 to 5 Minuites to recover

This is what Happends

1. Program load up- Everythings working Ok

2. I Click on Command Box - Its loads up & everything ok

3. Click on any button - Program comes up with a "Devices (Not Responding Error)" & If I Click on another button the Program locks up with a see though White screen comes over the program

Note- I notied that when my progrm were very small it was a very short Pause & than the program finited loading up But when the program became Bigger & with my window 7 Acer laptop it up over 30-Seconds before it recovers but than it ran ok (It bother me but I could live with it )

4. But With my new Dell laptop with Windows 8 it takes over 3-Minuites to 5-Minuites before it recovers ( this is way too long & it worries me, Something is wrong)

so whats going on?

A. I'm thinking the program has a lot of garbage in it? is thier a way I can clen it up (I have up to 400 saved programs)

B. command Box size buttona are 20x20 & Page 1 to 3 are full of buttoms & the last two are also are full of buttons

c. I using upto address 345 & more to come

So Whats wrong & how can I fix it?

Thanks

Music steve

looks like It was also caused by the Windows 8 "on screen Keyboard" for the Touch Screen Display

Windows 8.1 & very slow Keyboard Control

I need to do some more testing for the "On screen Touch screen control" to see if it was worth buying another separate On screen monitor? only problem is their all Big 22"

Please give this a Thumbs up if this helps?

I still have the

3. Click on any button - Program comes up with a "Devices (Not Responding Error)" & If I Click on another button the Program locks up with a see though White screen comes over the program

But w all the new setting its now less than the Acer Laptop (which is about less than 1-min) & that's acceptable !

Philipp

Don't known if it turns into a error code (Searching Hard Drive now,, I will see if I find anything could not find a file named *.err I have felling that we are on different pages LOL)

don't actually know what the program is doing ? its loading something

1. like I Said the program Loads Up Ok

2. I click on the Command Control & it loads up OK

3. The Program not done Loading something?

I make the program do this, to get it over with , ,,,,, I click on a button or 2 than it come up with this message see Pic

The Blue Bar says "command Box (Not Responding) & the screen has this white glare over it until the program recovers

[Blocked Image: http://i307.photobucket.com/albums/nn297/steve-kds/Devicenotresponding002.jpg]

It takes the program About 1-Minute to recover

after it recovers everything works Ok, I hope this helps & is this Normal?

Thanks for your Help

Sorry its a bad pic!

The program is like this for over 1- minute

Note - it happens every time I use the program & with any first Control box I load up after I active any Key it stalls than I active another key & this happens, After this happens the program recovers & everything works like normal

[Blocked Image: http://i307.photobucket.com/albums/nn297/steve-kds/Devicenotrespondingcut003.jpg]

Cpu 0=100%
Cpu 1= 10% to 15%

OS upgraded to Windows 10 - locks up for over 35 minutes Wow?
Same kind of problems w Windows 7 & 8

Anybody? Have I out grow this program Limits?