Art-Net from DMX Control 3.3.2

We proudly present: The release of DMXControl 3.3.3!


On September 29, 2026, we held our release show for DMXControl 3.3.3. During our usual “hour-long” session, we showed you all the new features in this version and what it now has to offer.
Read all about it in the corresponding news article: We proudly present: The release of DMXControl 3.3.3!

    Hello All,

    I am trying to get an ArtNet connection where I can send data from DMX Control 3.3.2 to Lightjams DMX Recorder within the same PC. I have done this successfully with D-Pro outputting ArtNet on internal adapter 127.0.0.1

    I am new to DMX Control 3, but I have set up my moving head lights and they are showing correctly in the Easy View visualizer.

    Is there a way to configure the Artistic License, Art-Net 4 interface to send information to the internal adapter 127.0.0.1?

    I opened the Easy View visualizer to receive on Art-Net instead of DMXControl 3 and it receives information from D-Pro on adapter 127.0.0.1 as well.

    I attempted to look through the forum but couldn't find an entry for this particular question.

    Any help would be appreciated.

    Kevin:)

    After spending some time looking at the Art Net posts and watching the YouTube ArtNet video I have managed to solve my problem.

    In DMXControl 3.3.2 when I open the Advanced Interface Settings for the Artistic License Art Net device the dialog box only shows (3) lines - Port - Force - Additional IP. I don't get the full list of choices as shown in the tutorial video on You Tube. I did download 3.3.2 again and reinstalled and got the same dialog box.

    I completely uninstalled 3.3.2 and installed 3.3.1. Now I get the correct options in the Advanced Interface Settings box (Net, Subnet, Send Univ, etc). In the "Additional send to IP" field I typed in my internal Ethernet adapters address and now the Lightjams recorder sees the data from DMX Control on that address.

    For now I will use 3.3.1 as that is working for my needs.

    Kevin

    Hello Kevin,

    with DMXControl 3.3.2 was a rebuilt of the Art-Net interface. This works now exactly according the Art-Net 4 Standard. That's why you see on the first view only the field called "Port address". This is related to Net, Subnet and DMX-Universum. But these values are also available if you don't know directly the Port address, when you extend the menu.

    But by the way: you can select alternatively the "old" version of the Art-Net interface during the installation of DMXControl 3.3.2. So if you have any trouble with the new one, you can use the old version in DMXControl 3.3.2.

    Stefan