LED Party Spot DDF gesucht?

We proudly present: The release of DMXControl 3.3.3!


On September 29, 2026, we held our release show for DMXControl 3.3.3. During our usual “hour-long” session, we showed you all the new features in this version and what it now has to offer.
Read all about it in the corresponding news article: We proudly present: The release of DMXControl 3.3.3!


  • Moin Leute

    Ich habe mir mal wieder was fürs Wohnzimmer gekauft 4 Eurolite Party Spots ich habe sie hinter die Schränke gestellt sieht an sich super aus wenn es abends ist.
    Nervig ist nur das DMXC 2 diese Lampen nicht kennt weil sie einfach zu neu sind an sich eine Super Sache aber naja nicht grade gut für mich.
    Ich betreibe sie in DMXC 2 alls 6 Kanal Dimmer Funktioniert zwar aber nicht grade die beste Lösung.

    Also mal ein bisschen im Forum gesucht aber nicht wirklich was gefunden.
    Ich habe mir also eine xml aus denn Forum gezogen was so ähnlich ist und hab sie bearbeitet am ende ist es nichts geworden :argh:
    Könnt ihr mir da Helfen? :/

    Mein Code
    <?xml version="1.0"?>
    <device image="Light.gif" initsequence="set 3 255">
    <information>
    <name>Eurolite Partyspot</name>
    <author>superboy</author>
    <version>1</version>
    </information>
    <channels>
    <function channel="1" minvalue="0" maxvalue="255" name="Red" fade="yes" type="r" />
    <function channel="2" minvalue="0" maxvalue="255" name="Green" fade="yes" type="g" />
    <function channel="3" minvalue="0" maxvalue="255" name="Blue" fade="yes" type="b" />
    <function channel="4" minvalue="0" maxvalue="255" name="Weiss" fade="yes" type="w" />
    <function channel="5" minvalue="0" maxvalue="255" name="Dimmer" fade="yes" type="dimmer" />
    <function channel="6" minvalue="0" maxvalue="255" name="Effekt" fade="yes" type="dimmer" />
    </channels>
    <form width="227" height="482">
    <deviceimage top="0" left="0" />
    <devicename top="0" left="40" />
    <deviceadress top="16" left="40" />
    <label top="180" left="180" caption="weiss" />
    <slider top="384" left="10" height="41" width="149" startvalue="0" endvalue="255" channel="2" />
    <label top="240" left="180" caption="CH1" />
    <label top="348" left="180" caption="CH2" />
    <line y1="228" x1="10" y2="228" x2="210" />
    <line y1="432" x1="12" y2="432" x2="200" />
    </form>

    </device>

    https://1drv.ms/i/s!ArSQv711oeeelmzXXEYhDJrvoVmD ( Das kam dabei raus)


    DMX Belegung der LED
    https://1drv.ms/i/s!ArSQv711oeeelm0cxzBeBRYK_KPj

  • Hi,
    Änderungen Bitte die Kanal Nummerierung. Die muß im DDF mit 0 anfangen.

    Du müsstest dann auch noch ein paar Slider oder ein ColorPicker mit rein nehmen.

    ________________
    Gruß Eat von Pete

  • Newly created posts will remain inaccessible for others until approved by a moderator. The last reply was more than 365 days ago, this thread is most likely obsolete. It is recommended to create a new thread instead.