One of the events I'm technical director for is Sexapalooza http://www.sexapalooza.ca/ and we just finished the second of three shows, using DMX Control for the first time.
This is a relatively complex event. We dont know the acts that will be on stage until a few days before and then, it can change during the show with 2 minutes notice.
The acts are mostly Burlesque, pole dancing, product demonstrations, fashion shows, male and female strip tease (nothing is revealed), belly dancing, live R&B singers, and anything else that happens to come along.
The hall is about 650 ft x 200 feet, the main stage is 24 ft x 12 ft with an 8 ft x 16 ft runway attached to the front (its a "T" shape).
Sound was 5,000W front of house and 500W monitors, crown amplifiers, Mackie Mixer, DBX and Alto compressor/Limiters, EV main speakers and EAW subwoofers. Sound sources were 2 Asus netbook computers, a dual Denon CD deck, and whatever the acts brought their music on, from Apple Mac, to Blackberry phone. 1 AKG handheld mic, 1 Shure SM58 mic with AKG wireless adapter and an AKG wireless headset mic, plus a Sennheiser 835 mic on a 50 foot cable.
Lighting was 2 x Martin mania scx500 scanners and 4 x Chauvet Colorpallette II (the discontinued nice bright ones) on a 10 ft x 10 ft truss raised another 3 feet using extra stage sections, 4 x Microh LED BAR II (runway uplighting), and assorted "disco" lights aimed at the ceiling of the hall for effect (actualy because the show owner wanted it).
Lighting was controlled by DMX Control V2.10.5 (of course) with an Enttec ODE Artnet interface and two Behringer BCF2000 midi consoles. The lighting computer was an Asus eeeTop Touch screen with an extra USB display adapter driving a second non touch screen for DMXC programming, status etc. The entire touch screen is used for 3 pages of Command Box.
One page for the preset "canned" scenes such as Master of Ceremonies Left, Right, Center, Runway, Demonstration, Pole dance, fashion show, and a few add on effects such as the searchlights and some RGB colour cycling for those "What the heck do I do now" moments, as well as a preset scene for the rare and short intermissions.
The next page is for direct control of the scanner colour and gobos. The third page is for less used scenes, experimental scenes and scenes we add as the show is running that we want to remember, possibly reuse, check later and move to the main command box bank.
The entire show was modeled in DMXC and EZView well in advance. Of course a week before the show, I find out that the American DJ X-Scan LED scanners that I ordered 3 weeks before were back ordered so I had to re build the scenes for the Martin Mania's and also accept that the manias werent going to be as bright so intensities would need adjusting.
Setup turned into the show from hell!
The electricians didnt get power to the truss until 1.5 hours before the show opened.
The house took another 1/2 hour to turn the brilliant sodium house lights off.
The fan on one mania stopped working (Many thanks to Electric Sound Crew for saving the day and suppling a replacement in minutes), and the manias are acting very unpredicatably. They seem to have a mnd of their own.
Its essential that they work reliably as they are being used as follow spots with preset positions on the stage as well as for searchlight effects on the ceiling above the stage and sweeping the audience during door prizes, contests, looking for volunteers for lap dances etc.
After checking DMX addressing 2 or three times, I remembered my own post here from a while ago and sure enough one was in 8 channel mode and the show is programmed for 6 channel mode.
Anyway, a few more of the usual technical silliness and the show goes on.
Friday we ran without the runway lights as I just didnt have time to set them up.
Saturday (12 hours of solid show with only 5 or 10 minute breaks) I got those running and The show started to look very nice indeed.
My assistant, Dee, only had a few minutes with DMXC and had only run lights once before (at the Ottawa Sexapalooza show which was thrown together the night before when I couldnt get the Behringer consoles to work, so was a very simple show with very few scenes).
A testament to just how good, effective and easy a DMXC show can be was when a gentleman came over to us and asked what we were using for lighting control and was amazed when we told him and showed him. He said he was a professional lighting designer and thought the show very good and effective, He assumed we had a "Name Brand" lighting desk back stage. We were too busy to talk, but I bet he would have been even more surprised to learn that Dee, the lighting operator had about 20 hours total experience and about 15 minutes instruction!
I'm hoping to get some video at the next event (March 12-14). Its not a spectacular "effects" type show, just lighting to enhance the entertainers and the audience experience and set mood so dont expect whirly club stuff, this is more like live, unrehearsed, unscripted improv theater.
Apart from the pro who came by to talk about the lights, we had many others, both entertainers and audience and members of the press who mentioned that they loved the lighting and had many ask for business cards saying they definately wanted to use me for their events.
Thanks to the DMX Control team, keep up the great work, you let us make the entertainers look good and that make us look good.
Christopher
Ambient Sound
Toronto, Ontario, Canada