Posts by tijntje

tijntje · DDF for Eurolite KLS-180/6 tijntje February 10, 2025 at 4:02 PM

So its possible to do this:

XML

<?xml version="1.0" encoding="utf-8"?>
<device image="Eurolite LED KLS180-6.png" type="DMXDevice" dmxaddresscount="5" dmxcversion="3.2.3" dffversion="1.0.0">
  <information>
    <model>LED KLS180/6</model>
    <vendor>Eurolite</vendor>
    <author>Test 1</author>
    <mode>29 channel mode (control)</mode>
  </information>
  <functions>
    <dimmmer dmxchannel="0"/>
    <strobe dmxchannel="1" name="Strobe Effect Spots">
      <step type="open" mindmx="0" maxdmx="9"/>
      <range type="linear" mindmx=10" maxdmx=" 255" minval="0.1" maxval="18"/>
    </strobe>
    <strobe dmxchannel="26" name="Stobe Effect Bar">
      <step type="open" mindmx="0" maxdmx="9"/>
      <range type="linear" mindmx=10" maxdmx=" 255" minval="0.1" maxval="18"/>
    </strobe>
    <rawstep dmxchannel="27" name="Bar">
      <step caption="No Function" mindmx="0" maxdmx="9"/>
      <step caption="Different patterns" mindmx="10" maxdmx="149"/>
      <step caption="Different patterns with increasing speead" mindmx="150" maxdmx="255">
    </rawstep>
    <rawstep dmxchannel="28" name="Internal Programs">
      <step caption="No Function" mindmx="0" maxdmx="9"/>
      <step caption="Auto Program 1 Slow -> Fast" mindmx="10" maxdmx="39"/>
      <step caption="Auto Program 2 Slow -> Fast" mindmx="40" maxdmx="69"/>
      <step caption="Auto Program 3 Slow -> Fast" mindmx="70" maxdmx="99"/>
      <step caption="Auto Program 4 Slow -> Fast" mindmx="100" maxdmx="129"/>
      <step caption="Sound Program 1 Slow -> Fast" mindmx="130" maxdmx="159"/>
      <step caption="Sound Program 2 Slow -> Fast" mindmx="160" maxdmx="189"/>
      <step caption="Sound Program 3 Slow -> Fast" mindmx="190" maxdmx="219"/>
      <step caption="Sound Program 4 Slow -> Fast" mindmx="220" maxdmx="255"/>
    </rawstep>
  </functions>
</device>

Display More

And for the RGB part this:

XML

<?xml version="1.0" encoding="utf-8"?>
<device image="Eurolite LED KLS180-6.png" type="DMXDevice" dmxaddresscount="4" dmxcversion="3.2.3" dffversion="1.0.0">
  <information>
    <model>LED KLS180/6</model>
    <vendor>Eurolite</vendor>
    <author>Test 1</author>
    <mode>29 channel mode (beam)</mode>
  </information>
  <functions>
    <rgb>
      <red dmxchannel="0"/>
      <green dmxchannel="1"/>
      <blue dmxchannel="2"/>
      <white dmxchannel="3"/>
    </rgb>
  </functions>
</device>

Display More

Thanks in advance,

Martijn

tijntje · DDF for Eurolite KLS-180/6 tijntje February 10, 2025 at 8:09 AM

Hi Showtechniker,

Thanks for the information. Will try it with the multipe DFF's then :-). 1 more question. Channels 27 to 29 have to be in a separted DDF? Or can they be included in the DDF1?

If I Look at the channels I have the following:

Ch1 Master Dimmer --> DDF1
Ch2 Spots Strobe --> DDF1

Ch3 R LED 1 --> DDF2

Ch4 G LED 1 --> DDF2

Ch5 B LED 1 --> DDF2

Ch6 W LED 1 --> DDF2

Then I have the same for the following Channels until Ch27. ( So Led 2,3,4,5,6)

Ch27 Led Strobe --> DDF3?

Ch28 Bar all Leds --> DDF3?

Ch29 Auto and Musik Programs --> DDF3?