Posts by lodekka

Hi Philipp,

Thank you for the fast reply... Of course it is obvious (I should have realised this- DOH!). Yes I can easily use another keyboard and connect my switch to whichever key I want and assign it in DMX Control.[Blocked Image: http://www.dmxcontrol.de/forum/wcf/images/smilies/thumbsup.png]

I need to use a tamperproof (anti vandal switch as the display will be left unattended but behind a screen, so a second keyboard with switch attached is ideal. Great![Blocked Image: http://www.dmxcontrol.de/forum/wcf/images/smilies/tongue.png]

The show is VERY simple so i am using a Velleman K8062 DMX unit as it does not require fast changes of scene or control many light fixtures (only about 12)...

I haven't noticed that my version of DMXC (V2.12) retain the last opened program - I must pay more attention nto what happens ext time I open it![Blocked Image: http://www.dmxcontrol.de/forum/wcf/images/smilies/BangHead.gif]

Thank you again - I'll go and try things.

Hi, Can anyone help me?

I wish to initiate a predefined (saved) light control sequence through a simple pushbutton that can be read by DMX control from somewhere as an input to the PC.

Does anyone know how this can be done?

Also it is possible to specify the sequence to be pre loaded into DMXControl at start up of the PC.

The aim is to have the PC power up and autoboot into DMXControl with a sequence preloaded to start from a pushbutton.

Any ideas welcomed.

Thanks