News

You must have noticed the "Saved" tab in the Effects and Filters, right? Did you know that you can quickly add your own effects here?

Maybe you already have a nodle interface. But how are the housings made? Read about it in this news.

Did you know, that you are able to keep some DMX controlled lights switched on with DMXControl 3, to have light on stage while the light FOH is already packed in cases? In this "Did you know?" edition, we will show you the needed trick for keep switched on any lights after shutting down DMXControl 3.

In your community, the foolish time is starting a bit earlier then usual: we say thanks for the 111111 post in our forum!

In July, we reported about the progress in the development for the next versions of DMXControl 3. Today, we would like to present you a small new feature, which will be available in DMXControl 3.2.

Due to the last complete revision of our documentation for the programming of DDFs for DMXControl 3, one article was "exploded" in comparison to the length of other articles in our DMXControl-Wiki. Meanwhile we improved it.

Do you use also sometimes more then one or two DMX universes and you don't want to calculate the DMX addresses for these devices? Then you should have a look inside this "Did you know?" edition...

Our DMXControl Convention 2018 has passed already for some weeks. But today, we would like to take a look back to our convention in a further way.

With the slogan "A.R.M. goes underground", at two evenings of the first "Kasseler Altstadtfest" a party took place at a very special and exciting location: in a underground parking.

Almost one year ago, we presented you a further way to support or daily work very easily: With the program AmazonSmile. Today we would like to give you a small update and want to say "Thank you".

The last days and weeks were very high temperatures outside. But our developer team is still hard-working and discussing in the background on the next versions of DMXControl 3.

Did you know that it is not necessary to redefine your most used colors in every new DMXControl 3 project via the colorpicker? Read in this "Did you know?" how to define your own standard colors...

After ten years of DMXControl 3 development there is now time to look back. More about that in this news posting...

In May, Stefan was in the culture and youth club "CD-Kaserne" in Celle, Germany and set the right light for the event "Celle tanzt!" (Celle dances!) using DMXControl.

You have wait quite a long time for the release of DMXControl 3.1.2. But now it is finaly here: Today, we release DMXControl 3.1.2!

Did you know, that you can switch the pan and tilt axes of your moving heads and scanners in DMXControl 3? Read all about the way to do so and why you could need this feature in this "Did you know?"

In the last few weeks there were no information about our current beta test. So here we have some for you...

Now, the article about our association convention 2018 is completed.

Despite technical measures such as reCAPTCHA, in the past we have seen increasing numbers of spam due to newly registered users. Therefore, there is now a small change in our user permissions.

We wanted to move the DMXControl 3 source code from our SVN system to a new GIT system for a long time. Now we have done it...