Dashboard
Recent Activities
-
Metric
Replied to the thread Yorkville LP-LED2x.PostAgreed, I'm not 100% clear what 7 and 8 in particular want to do. 6 I think is strobe speed but why the strobe would need a separate dimmer control for intensity I'm not sure. Channel 8 must be related to syncing the pods together but why or how that is… -
wkrug
Replied to the thread DDF für Phantom 65 für DMXC2.PostDas DDF vom Showtec Phantom 50 könnte möglicherweise auch für das Phantom 65 passen.
Vergleich mal die Bedieungsanleitungen im Abschnitt DMX Kanäle von beiden Geräten miteinander.
-Oder probiers einfach aus. -
LightningBrothers
Replied to the thread DDF für Phantom 65 für DMXC2.PostDas stimmt, weil dies die neuesten sind... und du darfst natürlich nicht direkt aus diesem Thread heraus in die Suche gehen. Aber wenn du mal mit dem Suchbegriff "Phantom" im Forenbereich für die DDFs für DMXControl 2 suchst, wirst du noch direkt auf… -
MeaxLighting
Replied to the thread DDF für Phantom 65 für DMXC2.PostDa kommen nur meine Beiträge -
LightningBrothers
Replied to the thread DDF für Phantom 65 für DMXC2.PostHallo...
du hattest die gleiche Frage ja bereits gestellt. Daher habe ich deinen neuen Beitrag nun mit zu dem alten verschoben, damit wir nicht in zwei Themen parallel über das gleiche sprechen.
Stefan
PS.: Das Forum hat übrigens auch eine Suchfunktion...… -
LightningBrothers
Replied to the thread Yorkville LP-LED2x.PostAfter I figure out, that you hid the manual of your text, I could finally check if your DDF looks well.
So if you wouldn't give the hint, that your interface wasn't work right, I would recommend to try a "simplier" mode like the 20 channel mode, Here the… -
Metric
Replied to the thread Yorkville LP-LED2x.PostOK after a bit of investigating, the problem was actually that the DMX interface wasn't putting out. The unit responds now after deleting and discovering again the interface into DMX control.
The next stumbling block seems to be that the strobe function… -
Metric
Replied to the thread Yorkville LP-LED2x.PostOK so the file doesn't work right now. Here's what I have at the moment;
(Code, 22 lines)
Any help appreciated. -
Mijo2019
Replied to the thread Cameo Hydrabeam 4000 RGBW ansteuern.Post[…]
Ja ich kann mir schon gut vorstellen, das man mit der DMX Steuerung noch sehr viel mehr aus dem Gerät heraus holen kann. Nicht falsch verstehen, aber mein Kopf ist nicht mehr gesund. Verstehen fällt mir inziwschen sehr viel schwerer. Dann kommt… -
wkrug
Replied to the thread 100 Volt auf DMX BUS.PostInteressant wäre, wie bei dem Strahler das interne Netzteil realisiert ist.
Ich habe so ähnliche Strahler von ADJ und dort ist so eine Netzteil ähnlich einem Laptop Netzteil verbaut.
Aussen kann hier nichts gemessen werden, da alle aussen liegenden Teile…